Difference between revisions of "WorkBreakdown"
From toaster
(→Frame) |
(→Frame) |
||
| Line 12: | Line 12: | ||
=== Exterior === | === Exterior === | ||
==== Frame ==== | ==== Frame ==== | ||
| − | * Axle & placement | + | * Axle & placement |
| + | "My simplest rule of thumb is to put the axle between 35% and 40% of the frame length from the back – so 36" on an 8ft frame is bang in the middle at 37.5%! You can go as far forward as 45% of the frame length, but only if you have a light galley and intend to fit a heavy tongue box." - Doug and Steve's frame fabrication doc: [http://www.teardroptrailers.us/tbuild.pdf] | ||
* Wheel size? | * Wheel size? | ||
* 1000 or 1200 for brakes? (1500# see here: [http://www.dmv.ca.gov/pubs/dl648/dl648pt12.htm] ) | * 1000 or 1200 for brakes? (1500# see here: [http://www.dmv.ca.gov/pubs/dl648/dl648pt12.htm] ) | ||
Revision as of 13:53, 26 January 2014
Contents
Helpers
- Inspiration
- Models
- Pictures
- wiki
- Foamcore mockup
- Illustrator
- take old interior to new profile
Trailer
Exterior
Frame
- Axle & placement
"My simplest rule of thumb is to put the axle between 35% and 40% of the frame length from the back – so 36" on an 8ft frame is bang in the middle at 37.5%! You can go as far forward as 45% of the frame length, but only if you have a light galley and intend to fit a heavy tongue box." - Doug and Steve's frame fabrication doc: [1]
- Wheel size?
- 1000 or 1200 for brakes? (1500# see here: [2] )
- Prime & Paint
- configuration
- dimensions 4.5 x 9
- Operating Lights
Walls
- Side Walls
- Roofwall
- Vent
- Fenders?
Skin
- Aluminum
- llll design
Hatch
- How to hold open?
Doors
- shape
- location
- construction
Front Box
Accessory Mounting/Storage
- table mounts and storage
- spare tire
Interior
Head
Foot
Kitchen
- Cooler / Stove component dimensions
Textiles
Electrical
- Battery & fuseblock
- Stereo
- LED lighting - What and where?
- Toaster FX
- charging (solar/vehicle)
